What CitecSCADA 6.10 Service Pack A Driver directly communicates with Rockwell Auto Allan Bradley Micrologix 1100 Controller's inbuilt EtherNET/IP port?

And what version or released of that driver?

Thanks
Chris

 

Chris,

You would use ABRSLinx or if you don't have RSLinx license then setup a manual TCP/IP board. The Protocol would be the same as SLC500.

Jeff Stadnik

 

Hi,

One of the option is via OPC using OPC driver.
See link below:
http://www.citect.schneider-electric.com/forum/showthread.php?t=8488

Regards.