Done but it is not working yet
Done, but there is not response from the converter. And if I put Unit ID as 1, the mo
I've enable it, but there is not response from the converter. And if I put Unit ID as 1, the modbus LED stops blinking on the HD67673
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
S | MODBUS Server device with relays? | Modbus | 2 | |
M | Energy Analyzer interfacing via Modbus protocol | Instrumentation & Measurement | 5 | |
C | MODBus TCP to BACNet IP Gateway Using v6 IP addresses | Modbus | 2 | |
S | Water/Gas Meter with Modbus/LonTalk/BACnet Compatibility | Modbus | 1 | |
L | Modbus 2 Bacnet Convertor | Modbus | 16 |