Control

Modbus comm. with Ingersoll-Rand CMC controllers

C

Thread Starter

C Espania

I need to communicate to an Ingersoll Rand CMC controller with a RS485/422 to RS232 converter to a PC. Can some one help me with address, baud rate, etc. to establish my first contact with the CMC?
 
J

Justin Darcy

I'm not sure if you have sorted this issue out by now but I've worked with the CMC on many projects for several years now. The default setting is normally 9600 8N1 and you will need to communicated to the CMC via a UCM module.

Let me know if you need further information.

Regards.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
Q Wonderware to Daniel 2500 FC Modbus Comm issue. Modbus 4
Omda_bk343 Honeywell Siemens Modbus Comm Problem Distributed Control Systems - DCS 2
I Modbus Comm between Totalflow XFC and Prosoft PLX31 Modbus 1
S Modbus comm with EGX100 Ethernet gateway Modbus 1
P Comparison B/w MVM194 & ML1400 , which is better for Modbus comm ?? Modbus 0
Similar threads
Wonderware to Daniel 2500 FC Modbus Comm issue.
Honeywell Siemens Modbus Comm Problem
Modbus Comm between Totalflow XFC and Prosoft PLX31
Modbus comm with EGX100 Ethernet gateway
Comparison B/w MVM194 & ML1400 , which is better for Modbus comm ??

You May Also Like

Top