Modbus for interfacing Fisher 364 ROC and SLC 500/5

B

Thread Starter

Bruce

Sales customer has a Fisher 364 ROC and we also have one but, I have no experience with Modbus protocol at this time. I need direction!
 
ProSoft Tech. makes a interface card for the SLC 500 you plug it in it will read/write modbus to any devise. You map the registers in the
Prosoft card (modified A/B basic card) for data coming in then read them out across the backplane.

good luck
 
E

Eduardo Manuel C. Cipriano

Hi

You can use MCM Module of Prosoft for the SLC side, while on the Fisher side try to check the Modbus module you wlll be needing including
some software packages

[email protected]
Eduardo Manuel C. Cipriano
Sr. Systems Engr.
Yokogawa Phils. Inc
 
Top