PLC programming tools used is concept 2.6 using Momentum PLC use for VSD ATV61. Peer cop address for input is 401550 length 4 BIN, Output 401500 length 10 BIN. Go to option link 0 is ticked. My Modbus port 1 (RS232) 8-E-1 address 1. Modbus port 2 (rs485) 8-e-1 address 1 both are set 9600.XMIT block address 401600.

 

You need to provide a lot more information on this:
What are you trying to accomplish?
What are all of your XMIT configuration register values?
Are you using RS-232 or RS-485?

>PLC programming tools used is concept 2.6 using Momentum
>PLC use for VSD ATV61. Peer cop address for input is 401550
>length 4 BIN, Output 401500 length 10 BIN. Go to option link
>0 is ticked. My Modbus port 1 (RS232) 8-E-1 address 1.
>Modbus port 2 (rs485) 8-e-1 address 1 both are set 9600.XMIT
>block address 401600.

Ian