Modbus TCP to Triconex Emulator

K

Thread Starter

ken_a

I'm having some trouble connecting my modbus master to a Triconex emulator. I can connect via modbus TCP to the physical hardware fine, but I'm having a little trouble connecting to the emulator. The help files say that the emulator supports modbus, but I haven't gotten it to work yet. I've selected the left module and the NET 2 port, and have the modbus slave ports configured in my TCM. Has anyone else had this issue before?
 
This issue has been solved. There's an undocumented order of operations that needs to be followed. First you connect to the emulator, then you set the emulator's IP & node values, and then you can download to the emulator and start the logic.
 
This issue has been solved. There's an undocumented order of operations that needs to be followed. First you connect to the emulator, then you set the emulator's IP & node values, and then you can download to the emulator and start the logic.
I'm not so sure this solves the problem. I have had no luck with this.
 
Top