Control

Modicon M340 TCP Communication

K

Thread Starter

Kamil ozkan

I want to read register from Weintek HMI with M340 plc. Cpu is 342020 and I try to read from CPU's ethernet port. I don't use NEO module. Is it possible? HMI uses 192.168.1.20 and port 8000. My CPU IP is 192.168.1.110.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
P Do Modicon PLC M340 support more then 1 client over Modbus TCP/IP Modbus 2
A Foundation fieldbus network to a Modicon m340 PLC Programmable Logic Controller - PLC 1
A Modbus TCP/IP communication Modicon M340 to GE PAC RX3i Modbus 3
R Regarding CAN error on M340 Modicon PLC Programmable Logic Controller - PLC 0
B Trying to control Modicon M340 over ethernet Programmable Logic Controller - PLC 1
Similar threads
Do Modicon PLC M340 support more then 1 client over Modbus TCP/IP
Foundation fieldbus network to a Modicon m340 PLC
Modbus TCP/IP communication Modicon M340 to GE PAC RX3i
Regarding CAN error on M340 Modicon PLC
Trying to control Modicon M340 over ethernet

You May Also Like

Top