Hi,

Can I use Nano PLC to communicate with Magelis?
If yes, what kind/model of communication cable can I use?

 

The answer is yes. You can use any of the Magelis units with the Nano plc. The cable is the same as the one used for premium and micro as well.

 

Hi,

of course you can !
You just need a standard Schneider cable XBT-Z968

 

Yes you can.
We used cable XBTZ968.

 

Yes, all Magelis units can be configure to integrate with the TSX07 Nano PLC. Infact, there is one model, XBTH811050 which can be connected to the Nano and will draw its power through the communications cable. The power is supplied by the Nano's com port so an external 24 Vdc power supply is not need to power the Magelis XBTH811050 in this configuration.