C
I have an AD001 Analog Input card in an Omron rack with a C200H CPU. The card is in slot zero. I'm using a PRO15 to program the CPU. All I want to do is verify if the module is working. I've cleared the I/O and verified the configuration. I've entered an end statement.
What I don't know how to do is monitor the inputs. I think the address starts with IR101.
Is there anyone who has experience with this setup. Again, all I want to do is input a voltage signal and verify that the CPU is receiving data from the monitor.
thanks,
CTG
What I don't know how to do is monitor the inputs. I think the address starts with IR101.
Is there anyone who has experience with this setup. Again, all I want to do is input a voltage signal and verify that the CPU is receiving data from the monitor.
thanks,
CTG
