oily sludges flow measurement

E

Thread Starter

Eudilson Nunez

Hi list,
I need a flow meter for oily sludges products in a 2" line.
Temp: 120 deg F
Pressure: 30 psi
Ph: 8
Water: 40 to 60%
Fe: ppm
Oil: 15 to 20%
Dry solids (Si, Al): 10 to 15%
Can someone recommend us a kind of meter for this purpose?
Thanks in advance.
 
J

Jinbin zhang

Hi, I think you can choose coriolis mass flow meter from ABB, Foxboro, E+H, etc.
with best regards,

Jinbin
 
W

Wayne Shimanis Vortex Technologies, Inc.

<< Eudilson >>
If high accuracy is not required, most of the available non-invasive doppler type flowmeters should do the job.

Regards,
Wayne Shimanis
Vortex Technologies, Inc.
 
Top