R
Hi there.
can anyone out there help with the setting up of an analogue input card for the omron c1000h plc. I have read the manuals and tried the examples but to no avail. All i need to do is read the input value (range 0 to 10v)and do some comparisions. I do not need scaling or offsets etc. My input card is placed in channel 30 i have tried 4 word operation, moved the card to channel 0 and 2 word operation. I know its an old plc but i am stuck with it.
any help would be appreciated
thanks
richard
can anyone out there help with the setting up of an analogue input card for the omron c1000h plc. I have read the manuals and tried the examples but to no avail. All i need to do is read the input value (range 0 to 10v)and do some comparisions. I do not need scaling or offsets etc. My input card is placed in channel 30 i have tried 4 word operation, moved the card to channel 0 and 2 word operation. I know its an old plc but i am stuck with it.
any help would be appreciated
thanks
richard