Pilot Plants for teaching Purpose

C

Thread Starter

C.P.Ku

We are planning to design and construct five (5) laboratory pilot plants and process units for teaching purpose. They are: 1. Gas Process Pilot Plant-consist of control loops for air flow (PID), air pressure (PID) and ait temperature (PID). All transmitters and actuators are of intelligent type compliant with Foundation Fieldbus standard. All devices to be interfaced with Citech or Genesis SCADA System. 2.Boiler Drum -Heat Exchanger Process Pilot Plant. With control loop for Drum level control,steam pressure (PID), steam flow and feedwater flow (PID), temperature controls and feedforward, measurement of parameters. Fieldbus devices and SCADA system required. 3. pH control process unit-control loop for on-off, p, PI, PID controls. Using PID controllers and interfaced with SCADA vis RS-485. 4.Level control process unit-control loop for on-off,P,PI,PID controls. Using PID controllers and interfaced with SCADA system vis RS-485 5. Heat transfer control process unit-control loop foron-off,P,PI,PID control of heat transfer and Temperature. We are looking for information related to the above projects, particularly information from complete projects for teaching institutions. Organisations, universities, colleges, system integrators, laboratories and engineers who has the above information, please advise. Thank you.
 
J

Johan Bengtsson P&L Automatik AB

You might want to look into combinig this with our teaching software for process control. We have successfully connected other laboration hardware to our software. Checkout our homepage for more general information about our products: http://www.pol.se/ or contact me directly ([email protected]) /Johan Bengtsson ---------------------------------------- P&L, Innovation in training Box 252, S-281 23 H{ssleholm SWEDEN Tel: +46 451 49 460, Fax: +46 451 89 833 E-mail: [email protected] Internet: http://www.pol.se/ ----------------------------------------
 
Top