C
What is the right procedure to use with a PL7 Pro PID and a thermocouple?
The PL7 Pro PID works the way I would expect using analog from a TSX AEZ thermocouple card.
Example: PID SP = 1600
With this example the PID cuts the blower at around 1600F.
The thing that concerns me is that the analog value is 16000 because it is in 10th of a degree.
When I put the analog value divided by 10 into a word and us that in the PID it doesn't work.
The PL7 Pro PID works the way I would expect using analog from a TSX AEZ thermocouple card.
Example: PID SP = 1600
With this example the PID cuts the blower at around 1600F.
The thing that concerns me is that the analog value is 16000 because it is in 10th of a degree.
When I put the analog value divided by 10 into a word and us that in the PID it doesn't work.