D
I Have a PLC TSX17-10. But every time I turn on the power, the PLC will indicate an error (The Indicator LED of RUN-STOP and I/O-MEM are Blink).
From the manual book, I have read That The error maybe cause by the internal RAM, and
I already try to change the the internal RAM, but the error is still exist. So, I must try to reset the plc, but i have some problem to reset it to clear the internal RAM.
From the manual book, I have read That The error maybe cause by the internal RAM, and
I already try to change the the internal RAM, but the error is still exist. So, I must try to reset the plc, but i have some problem to reset it to clear the internal RAM.
