T
I need to provide a method to automate testing of Uninterruptable power supplies (UPSs). I want to be able to cut off power programmatically over a serial RS232 connection.
The module must accept 120VAC as power, then switch a 120VAC standard wall receptacle using an RS232 transfer (eg. ACSII 1==switch_on 2==switch_off)
I have searched long and hard for such a simple device, and found nothing.
Any ideas on what company might be selling such a thing would be greatly appreciated.
Thanks,
-=Travis Martin
The module must accept 120VAC as power, then switch a 120VAC standard wall receptacle using an RS232 transfer (eg. ACSII 1==switch_on 2==switch_off)
I have searched long and hard for such a simple device, and found nothing.
Any ideas on what company might be selling such a thing would be greatly appreciated.
Thanks,
-=Travis Martin