S
I have an SLC5/05 using RS485 on channel 0 connected to a Net AIC module, with two PC's, running Win2k, connected to two other Net AIC's.
I've tried using the PIC driver on RSLinx (V2.30.01 & V2.30.02 candidate both tried) on the 2 PC's but they do not pick up anything on
RSWHO. I've followed all the Rockwell KB articles about PIC driver problems and still the driver shows as STOPPED in the driver config
screen.
Also, does the comm port on the PC need to be configured as 485 or 232? (Jumper settings on one port give us this option)
Any help greatly appreciated.
Steve
I've tried using the PIC driver on RSLinx (V2.30.01 & V2.30.02 candidate both tried) on the 2 PC's but they do not pick up anything on
RSWHO. I've followed all the Rockwell KB articles about PIC driver problems and still the driver shows as STOPPED in the driver config
screen.
Also, does the comm port on the PC need to be configured as 485 or 232? (Jumper settings on one port give us this option)
Any help greatly appreciated.
Steve