J
I found the article at http://www.control.com/1026147153/index_html very useful and am trying to basically do what is listed in there.
Issue:
A 'Class is not licensed' exception generated on the 'Connect' call in the call below:
dim AnOPCServer As OPCServer
AnOPCServer = New OPCServer
AnOPCServer.Connect("RSLinx Remote OPC Server", "10.0.0.90")
If I do a local connect on the 10.0.0.90 server box (OPCServer.Connect("RSLinx OPC Server"), no error is created. This is when the RSLinx software is activated on the server.
However, whether I have activated RSLinx on the client or just have Lite installed, I receive the above error saying the class is not licensed.
I can ping the server machine from my client machine, but am unable to browse or connect to it in the OPC test client.
Please help!
Jennifer Haubold
Application Developer
Golden Technologies
[email protected]
(219) 462-7200 ext. 228
Issue:
A 'Class is not licensed' exception generated on the 'Connect' call in the call below:
dim AnOPCServer As OPCServer
AnOPCServer = New OPCServer
AnOPCServer.Connect("RSLinx Remote OPC Server", "10.0.0.90")
If I do a local connect on the 10.0.0.90 server box (OPCServer.Connect("RSLinx OPC Server"), no error is created. This is when the RSLinx software is activated on the server.
However, whether I have activated RSLinx on the client or just have Lite installed, I receive the above error saying the class is not licensed.
I can ping the server machine from my client machine, but am unable to browse or connect to it in the OPC test client.
Please help!
Jennifer Haubold
Application Developer
Golden Technologies
[email protected]
(219) 462-7200 ext. 228