Dear List Members,

We're trying to commission a 1747-SCNR module (Control net scanner for the SLC 500 PLC)

we download the "eds" file from the AB web site and use it with the RSnetworx software in order to do the the module configuration. But when
we try to edit the scan list of the module the following message shows up. "scan list configuration tool error" or similar.
We use the same version to configure other nodes without problems. we try different operating systems, different machines nothing works.

The RSnetworx version we are using is the 2.22 and nobody from Rockwell give us a helpful answer.

Does anybody out there experiencing the same problem?

we welcome any suggestions!!!

Thanks


Juan De los Santos

 

Hi juan,
Try to install the RSI Support Library - Service Pack 1 for RSNetWorx for DeviceNet.
You can find it at : www5.software.rockwell.com

see the technote ID #R524
Regards

 

Juan,
The phone number for Rockwell Automation Technical Support is 440-646-5800.
They could have told you that support for the 1747-SCNR was added to RSNetworx 2.23
You may obtain an update at this url:
http://support.software.rockwell.com/webupdates/

Regards,
Dan Hazel
Rockwell Automation