hello.

i want remote programing 3 plc station s5-135u.

for one plc install cp1430 tcp/ip, h1.

i want with one pc station remote programing with step 5 & monitoring with wincc from siemens. but i don't know if i require special cp on pc station?

plz help me.

 

I can do that. For your simple SCADA network it is recommended to create a MTU with your own program in maybe C++ or other simple programming language. Then you can use database of WINCC and share your information with it. But I can't see you as soon because I am in Iran and in two years of soldiery that everyone must pass to do anything or go out. But if you can give a free scholarship for me in your country I can solve all of your problems as this.

 

Hello;

Siemens says you can program S5 CPUs remotely using Step 5 through a CP1430 over TCP:

http://support.automation.siemens.com/WW/view/en/4796510

http://support.automation.siemens.com/WW/view/en/22535867

http://cache.automation.siemens.com/dnl/zQ1MzUxAAAA_584537_FAQ/app_234.pdf

For a more complete list of links on the subject:

http://support.automation.siemens.c...ction=cssearch&searchinprim=0&nodeid0=4000024

Hope this helps,
Daniel Chartier