M
Can CP1613 card be used to get data at the same time from:
1 - Siemens S7 400 PLC using CP1613 Card's Ethernet Port
2 - Siemens S5 PLC using CP13 Card's serial port (H1 Cable)
I have setup successful communication between OPC Server and S5 PLCs (SINEC H1 Network) as well as S7 PLCs using CP1613 Card. I can read S5 and S7 data in my OPC Cients when only one either S7 or S5 is connected to CP1613. Whenever i plug in S7 Ethernet cable in cp1613 card's ethernet port, OPC Server drops S5 connections.
I will appreciate if some one could please tell whether it is CP1613 card not allowing communication with S5 and S7 PLCs at the same time or it could be configuration problem.
Thanks
1 - Siemens S7 400 PLC using CP1613 Card's Ethernet Port
2 - Siemens S5 PLC using CP13 Card's serial port (H1 Cable)
I have setup successful communication between OPC Server and S5 PLCs (SINEC H1 Network) as well as S7 PLCs using CP1613 Card. I can read S5 and S7 data in my OPC Cients when only one either S7 or S5 is connected to CP1613. Whenever i plug in S7 Ethernet cable in cp1613 card's ethernet port, OPC Server drops S5 connections.
I will appreciate if some one could please tell whether it is CP1613 card not allowing communication with S5 and S7 PLCs at the same time or it could be configuration problem.
Thanks