P
I'm a student doing project on tuning parameters of PID controller of a fan coil unit, however
the output value of the PID controller oscillates between the high clamp and low clamp value that
result in poor performance. I don't know how to determine the sampling rate. Furthermore, there
is no bias input in the PID block so how can I obtain a good performance? Thank you!!
the output value of the PID controller oscillates between the high clamp and low clamp value that
result in poor performance. I don't know how to determine the sampling rate. Furthermore, there
is no bias input in the PID block so how can I obtain a good performance? Thank you!!