Has anyone written an open source interface to the Satchwell Bas2000 system before. Any help greatly appreciated ie, source, protocol info
etc etc.

 

Hi Andy

We have an HMI that can talk to various systems including Satchwell BAS 2000 (I'm supprised anyone else still needs it).

We did this for a UK Hospital.

Regards...
Steve Brown

 

Hi Steve,
do you also have an HMI for the newer System BAS2800+ ?

Mike

 

Hi Steve,
I would be interested in aquiring that Satchwell BAS2000 interface and also if there is anything available for BAS2800+

Regards,

Tim Powell
[email protected]

 

Dear Steve

On the off-chance that you are still receiving this message - I would be very interested in buying an HMI to the Satchwell BAS2000 system from you.

Best regards

>We have an HMI that can talk to various systems including
>Satchwell BAS 2000 (I'm supprised anyone else still needs it.

<b>Moderator&#8217;s Note:</b> If anyone can help this guy please post.

 

Hello,

The user manual indicates the device supports MODBUS.

PeakHMI supports MODBUS.

Good luck,

Mark
https://hmisys.com/