I have a program to program a SESTEP 530 from Sprecher & Schuh. The communication between the PC and the PLC can only be made by a PC wit a 8086 or lower processor. If someone have a newer version which can run under a Windows (WIN95,98 or NT) environment and/or a faster processor (485 or pentium) I would appreciate it very much to send me this information. (or an alternative) Note : The communication goes over a RS232-port.

 

You can contact hitachi PLC local supplier, they have a software that runs under windows and is in full compliance with sprecher. Hope to help you Regards

 

I have a program to program a SESTEP 530 from Sprecher & Schuh. The communication between the PC and the PLC can only be made by a PC wit
a 8086 or lower processor. If someone have a newer version which can run under a Windows (WIN95,98 or NT) environment and/or a faster
processor (485 or pentium) I would appreciate it very much to send me this information. (or an alternative) Note : The communication goes
over a RS232-port.