Hi all i have an old Allen Bradly setup with a 5/03 CPU and a 1746-HSRV card connected to a 1369-DDM-030 motor controller, connected to a 0-200Hz max 4000RPM motor. (Rs logix 500)
i have the setup of file transfer to the card from the CPU which is all working ok, apart from the setup file i need to send to the card, the Manual is pretty useless on this so any pointers or help would be gratefully revived.
i have the setup of file transfer to the card from the CPU which is all working ok, apart from the setup file i need to send to the card, the Manual is pretty useless on this so any pointers or help would be gratefully revived.
