K
I need to get a certain parameter from Ingersoll Rand air compressor to Siemens s7-300 plc. sg intellisys controller part no: 39897095..
I’m not familiar with the communication available on the controller, but i do spot a rj45 port. i can’t seem to find a manual for this particular controller. few reads suggests of using an x-iri interface gateway for communication.
Do i need this part or I can directly connect my plc com. module to the IR controller?
I’m not familiar with the communication available on the controller, but i do spot a rj45 port. i can’t seem to find a manual for this particular controller. few reads suggests of using an x-iri interface gateway for communication.
Do i need this part or I can directly connect my plc com. module to the IR controller?