I'm working on a remote accessing project. In this project Datas are taken by PIC16c77 and then transferred on Siemens GSM Modem. But I came across some problems on using gsm modem.
Could you help me on using siemens gsm modem?
Such as necessary command chains, etc.
I would be glad if you help me.
Regards
Neset Ustundag
Turkey

 

Hello,

I am using a Siemens M20, and I found some very helpful sides for SMS problems. For general questions on SMS, check out:
http://www.mobile-net.ch/dokumente/

For Siemens related topics, check:
http://www.siemens.at/ce_hotline/en/technik/index.htm
There is a FAQ and a download section, so first check out the FAQs if there has been the same problem you have. If this is not the case, try the download section, There is very helpful information about SMS.

Hope this meets your needs.

Uwe

 

I am using a Siemens M20, and I found some very helpful sides for SMS problems. For general questions on SMS, check out:
"http://www.mobile-net.ch/dokumente/":http://www.mobile-net.ch/dokumente/

For Siemens related topics, check:
"http://www.siemens.at/ce_hotline/en/technik/index.htm":http://www.siemens.at/ce_hotline/en/technik/index.htm
There is a FAQ and a download section, so first check out the FAQs if there has been the same problem you have. If this is not the case, try the download section, There is very helpful information about SMS.

Hope this meets your needs.

Uwe