K
I'm trying to classify a KKS-tag subsystem for over-fire air (OFA) equipment, but can't find anything specific in the standard Siemens set. I'm guessing it fits into an existing sub-system quite nicely, but I don't know enough about the mechanical process of OFA to figure it out. I normally just assign the cables!
I currently have my tags in the HJA section (Ignition burnes, since we are doing a burner upgrade alongside the addition of OFA ports), but I am in danger of conflicting with existing plant tags (the plant is in South America, and communication about a plant-wide set of tags has been difficult).
I originally had the points in HLA (Combustion air - ducting system), but this was rejected by the plant.
Another option that I had spotted was HJL (Ignition firing equip. - Combustion air supply system).
I would let the plant guide me on this, but communication happens through a third party, and for some reason takes so long that I probably don't have time for these tags to get rejected-without-recommendation twice. Thanks for any help.
I currently have my tags in the HJA section (Ignition burnes, since we are doing a burner upgrade alongside the addition of OFA ports), but I am in danger of conflicting with existing plant tags (the plant is in South America, and communication about a plant-wide set of tags has been difficult).
I originally had the points in HLA (Combustion air - ducting system), but this was rejected by the plant.
Another option that I had spotted was HJL (Ignition firing equip. - Combustion air supply system).
I would let the plant guide me on this, but communication happens through a third party, and for some reason takes so long that I probably don't have time for these tags to get rejected-without-recommendation twice. Thanks for any help.