I have a Simoreg PWM Drive Model 6RB2030. I need a manual or the input signal pinout plz.

 

try this site. siemens site has tech. manuals.
http://www4.ad.siemens.de/WW/llisap...on=csopen&lang=en&siteid=CSEUS&objid=10865435

 

This is what I have as far as the basic pinout goes:
Basic 6RB2030 Pinout

ELECTRONIC SIGNALS - LOW LEVEL
Term# Location Function
56 N0-X31 Reference High +/-10VDC
14 N0-X31 Reference Common
55.1 N0-X31 Tach High if 1000-1200 max RPM +/-65VVDC
55 N0-X31 Tach High if 1500-2000 max RPM +/-65VVDC
55.3 N0-X31 Tach High if 3000 max RPM +/-65VVDC
13 N0-X31 Tach Common
63,64 G0-X1.3 Drive Enable Signals ~+24VDC
74 G0-X1.3 Fault / Ready Contact used w/ 73.1 N/C
73.1 G0-X31 used w/ 74

POWER SECTION
Term# Location Function
~ ~ ~ Posts at Bottom 3 Phase @165VAC
L1,L2 A1, A2, An... Armature Connections +/- 200VDC
M200 M200 bus post insulator Connection to frame

POWER SUPPLY UNITS
Term# Location Function
27,28,29 X0.2 3~ Power for logic power supply 3~@380V fuse @ 2A
30 X0.2 N neutral for fan(s)
7 G0-X1.3 +24VDC internal logic
10 G0-X1.3 -24VDC internal logic
44 G0-X1.3 +15VDC internal logic
45 G0-X1.3 -15VDC internal logic
15 G0-X1.3 Logic Common

POTENTIOMETER SETTINGS

R20 is DRIFT POT
R11 is TACHO for Speed scaling
S101 Current Limit Setting, 0 is minimum MAX current, 9 allows maximum MAX current
One pot is for I Gain - Integral Gain and the other is the P Gain - Proportional Gain