A
This is the capture file from between an interface that I have written and the Diris AP meter with a JBus/Modbus interface plugin module. I cannot seem to be able to convert any of the following values into what is shown on the Diris
display. I would be grateful if anyone has any suggestions/has come across this before with a Diris AP meter.
Values shown in Hex for two registers for each value.
6bf4 1388 should be value for Frequency (50Hz),
0068 016f should be Active Power +/- (8.84kW),
0109 0063 should be Reactive power +/- (-5.65 kvar)
Thanks in advance
Andy
display. I would be grateful if anyone has any suggestions/has come across this before with a Diris AP meter.
Values shown in Hex for two registers for each value.
6bf4 1388 should be value for Frequency (50Hz),
0068 016f should be Active Power +/- (8.84kW),
0109 0063 should be Reactive power +/- (-5.65 kvar)
Thanks in advance
Andy