tcp/ip protocol interface (FactoryLink)

A

Thread Starter

Alex Burk

I need TCP/IP Protocol Interface(Universal Dynamics Technologies, Inc.) installation for
FactoryLink.

Thanks
 
We are need tcp/ip connect between QNX station and FactoryLink station (NT4) for data exchange.
On FactoryLink side that is must be standard module for FactoryLink and on QNX side we will
try write our driver.
 
Try to write an OPC server for your system. Factory link can then talk to the OPC server and your systems data will also be open to other systems. OPC is the way to go for the future.

Regards
robert
 
Thread starter Similar threads Forum Replies Date
R Modbus 10
H Modbus 4
V Modbus 1
E Motion Control 2
R Modbus 2
Top