E
Has anybody connected a Siemens panel with a RJ3/RJ3iB robot through HMI? (Siemens panel is TP170B)
The RJ3iB only support Protocol Serial SNPX and the protool is not posible select this...
A customer has tested with Omron, QuickPanel, Proface, Exor... with no problems, but they have problems with a Siemens panel (there is no communication between robot and panel).
Any suggestion?
The RJ3iB only support Protocol Serial SNPX and the protool is not posible select this...
A customer has tested with Omron, QuickPanel, Proface, Exor... with no problems, but they have problems with a Siemens panel (there is no communication between robot and panel).
Any suggestion?