It's the first time that I work on an Innovation Series Controller (UC2000). In the past I worked many times with Mark VI.

I know that the software tool for UC2000 is the same of MKVI (Control System Toolbox). The question is: I have an UCVDH2A from a MKVI application, is it configurable fo UC2K application? I see that the Toolbox, for an UC2000 application, has UCVDH1, UCVDH3, UCVDH5, etc. but not "even" version, which are the differences between these cards? For MKVI application I use a VCMI as Bus Master Controller, but I saw an UC2000's application without this card, who is the bus controller in this case?

Thank you for your help!

 

The UCVDH1 and H2 are listed together in documentation (GEI-100603A for example), so I suspect that selecting UCVDH1 would work.

The Innovation Series Controller acts as a bus master itself if it is configured in Slot 1. It can also work with a 90-70 PLC as master. The manual GEH-6371 covers configuring it this way.