Upgrade Bailey Network 90 to Windows based HMI


Thread Starter


Presently the operator have displays which are DOS based. We want to change these to Window based display system. We want to know the most cost effective way to do this.

The package should support more than 10000 Tags. There are 22 PLCs and 17 operator stations connected with this network. The sytem was originally supplied by Ansaldo Industries, Italy.

Vendors/system integrators should contact me directly at <[email protected]>

Corrado Giussani

See info about OPsCon product from Previse
it works great also to migrate all your application on Intellution iFix

Kevin Altomare, CA

I know this reply is a bit late, but take a look at Citect (www.citect.com). There's lots of Bailey INFI 90 sites that have changed their to top-end to Citect. Some of the sites have way over 30 000 tags and Citect still have the record for the world's largest scada system with 500 000 tags. Also, Citect has 160+ drivers included for no extra charge so you can hook up any other IO devices too.

Contact the Citect office in Chicago, they're got a lot of guys there that have had hands-on experience working on Bailey projects.