Does anyone have any past history with Veris Industries, especially in regards to product reliabilty, service and support of the products?
In particular I am interested in the branch circuit current monitoring they offer.

 

Dan,

Please note that current monitoring in a 3 phase circuit is really only effective for a) severe overload situations and/or b) underload situations if the 'normal' load is at least 65% of the nominal rating of the circuit. In other words, current deviates very little below 65% load. I would recommend that you look at Power Monitors; they are relatively inexpensive and provide far greater reliability of monitoring than current monitors.

 

Hello Dan,
I work at Veris Industries and happened upon your post here. I am hopeful that one of our previous customers will find your post and offer some help. However, if you would like I would be glad to provide some contacts you could call who have used the product in the past. I could personally speak to our quality metrics regarding this product line as well. Feel free to contact me if you would like.

Sincerely,
Mark Shelton
Veris Industries
503 670 1210
[email protected]