P
I am a student in the 5th semester of the course mechatronics/robotics
at University of Applied Science Technikum Vienna and work in addition for FerRobotics Compliant Robot Technology GmbH.
Currently, it is my job to develop a communication module, which is to be installed in all products of the company in the near future.
During my research for a suitable bus, three systems have particularly offered:
-CAN
-Ethernet/IP
-Modbus TCP
Now I'm looking for a microcontroller which has integrated the Modbus TCP solution. It should have integrated the following things:
1 x Analog out 0-10V
2 x Analog in 0-10V
1 x Digital out
1x SPI (for communication with acceleration sensor)
The particular requirement is that the chip and an additional
acceleration sensor have to fit on a 25mm x 35mm x 12mm - board.
I found out that the company Anybus has a solution, that would be
great, but unfortunately it is far too big.
Many thanks in advance for your help
at University of Applied Science Technikum Vienna and work in addition for FerRobotics Compliant Robot Technology GmbH.
Currently, it is my job to develop a communication module, which is to be installed in all products of the company in the near future.
During my research for a suitable bus, three systems have particularly offered:
-CAN
-Ethernet/IP
-Modbus TCP
Now I'm looking for a microcontroller which has integrated the Modbus TCP solution. It should have integrated the following things:
1 x Analog out 0-10V
2 x Analog in 0-10V
1 x Digital out
1x SPI (for communication with acceleration sensor)
The particular requirement is that the chip and an additional
acceleration sensor have to fit on a 25mm x 35mm x 12mm - board.
I found out that the company Anybus has a solution, that would be
great, but unfortunately it is far too big.
Many thanks in advance for your help