WWRSLINX & 1784-PKTX Setup?


Thread Starter


I am trying to connect my WW V7.11 to an SLC-04. I think my WWRSLINX or RSLinx isn't setup right. Does anyone have a setup procedure?

Trevor Ousey \(list\)

1.In RSLinx configure correct driver for your application,
2.Configure Client Application (in RSLinx under communications), set 1KT:0 to the driver required.
3.In WWRSLinx, add a topic and set it to 1KT:0.

You will need RSLinx OEM or better, RSLinx Lite is not suitable. Also if youhave RSLinx Pro you can test the driver using data monitor.