W
WE have 1 Gas Turbine Frame 9E (3000 rpm) Mark VI controlled and i work as a Trainee Engineer at the plant. I did not understand the reason/facts behind the problem faced recently. And that is Flow Divider Magnetic Pickups were hunting repeatedly during Start up and Shutdown.Because of this issue Loss of Flame was seen on HMI and Turbine got trip.
I might be not providing full information regarding this issue but I'll provide the information what so ever is required.
Please do lead me to the solution.
Thanks
I might be not providing full information regarding this issue but I'll provide the information what so ever is required.
Please do lead me to the solution.
Thanks