Hi everyone:
I need to acquire data from some AB SLC5/02, GE Fanuc 90-30 and Koyo SU-6, and display this info in RSView. I'm thinking about using a CLogix as Gateway, but I didn't found any info about Koyo PLCs (only a couple of pages in simplified chinesse). Can anybody help me?

Thanks
Rafael Becerra

 

Hello. For Koyo information, try automationdirect web page. Greetings.

 

The PLCs sold by Automation Direct are made by Koyo. Perhaps their DL-06 is the same as the Koyo SU-6. If so, you can download the user manual at:
http://web6.automationdirect.com/st...ware/DirectLogic_06/Documentation/D0-06USER-M
(note the long URL. you may need to cut and paste in parts to your web browser)

Dick Caro
============================================
Richard H. Caro, CEO
CMC Associates
2 Beth Circle, Acton, MA 01720
Tel: +1.978.635.9449 Mobile: +1.978.764.4728
Fax: +1.978.246.1270
E-mail: [email protected]
Web: http://www.CMC.us
See my new book Automation Network Selection
http://www.isa.org/rd.cfm?id=3573
============================================

 

Koyo PLCs (or Direct PLCs) work with GE CCM protocol. Their implementation of the GECCM is called K-sequence, AFIR.

Regards
Piotr Kowalski

 

Good morning Rafeal

Go to http://www.hitech-america.com/plc-pws/ti-435.pdf
This page has the communication diagrams for the
koyo su-6 plc.

hope this helps

calvin smith
[email protected]