A
Abdul
I am trying to communicate with a compactlogix PLC over internet. I have connected a modem to the PLC and configured the port mapping. when I access the modem IP through a browser, it will route me to the PLC embedded webpage. However, the difficulty what I am facing is in creating a driver for the PLC in RSLinx in order to communicate read and modify the controller logic.
I would appreciate if you could able to take some time and look at this issue.
my email is: [email protected]
Thank you.
I would appreciate if you could able to take some time and look at this issue.
my email is: [email protected]
Thank you.