Hi all,

Any one can help me in this test!

Oil care test:
In the attachment is one (1) oil sample report and drawings to be marked up.

Here are the questions for the same.

• Oil sample report

Please, elaborate your diagnosis, evaluating the trend for Viscosity, Particle count, and Water content parameters.

Please, provide recommendations based on the current oil condition.

• Drawings – Lube oil tank and Compressor

The required service is Oil Flushing.

Please:

• Send the sequence of major steps to perform the flushing activity.
• Advise on the oil type & viscosity to perform the flushing activity.
• Recommend the flow for the flushing activity.
• Advise on the filter porosity.
• Advise on how to collect the particles during the flushing activity.
• Suggest one technique to reduce the flushing.
• Mark up both P&IDs for flushing activity.

 

I ask again, what does this have to do with control automation?

 

Sorry! Is it forbidden to post here? !!

 

Posting for help with oil quality issues in a control automation forum probably isn’t going to get you many helpful responses to your questions.

Yes; we sometimes deal with oil quality issues as they relate to hydraulically-operated control valves and other such devices—but only at a very high level, not with the level of detail you are enquiring about. Our main discussions about oil quality are related to the problems poor oil quality cause for electro-hydraulic servo valves used to control the flow of oil to hydraulic actuators for devices like fuel- or steam control valves. We don’t get into flushing procedures and details such as you are asking about.

You are free to post your questions here but most of us deal with control systems and communication protocols and such, so the number of responses and the quality of responses probably won’t provide you with the level of detail you want.