Recent content by Francois

Hi, the parameters I'm using with hyperterminal are the following: 19200 bauds - 8 bits – Parity none – 1 bit stop – no flow control. When you connect and type enter you should see something.

Hello, If my memory is good to connect with terminal or Dumptrux tool on T8110B the key should be in RUN position. That might solve your issue to collect the logs. Once connected you can use ls command to collect the logs. To clear the nvram (will erase the logs) you must open the connection...

Sure, however from experience I remember it's worth playing a bit with this maintenance key. As well if you can connect using a terminal you can elevate (su), password is often "password" "PASSWORD" or project name. If terminal connection is working you can start from there.

Hi, what is the position of the maintenance key?

Hello, did you get the 1mn synchronization pulse to work with the virtual machine? I had to write a specific application to use USB to Serial converters.

Hi, For Alspa S4 there was no Controsteam or Controgen, these brands appeared later with use of B&R automation modules. For newer versions, migrating to new version of Alspa (6 / 6.1) is often interesting because the logic is the same in Controcad. For S4 it's a bit different, because the...