Recent content by Ikhtiander

Hi Sutto, I believe you meant "plc" instead of "clp" ? if so, what is PLC brand/model that yiu are going to connect to this ESTONE HMI ? From manual that you shared, ESTONE HMI is supported two communication methods : - JSON through serial port - customized HEX through serial port so your...

Hi Ibrahim, please check this : https://new.abb.com/power-generation/systems/power-plant-automation/p14 https://library.abb.com/r?cid=9AAF401531

Here is one of the basic explanation for Modbus TCP protocol with IPv4 which using 32 bit IP address size at the Network Layer (Layer 3) https://www.prosoft-technology.com/kb/assets/intro_modbustcp.pdf

Hi mhaiderkhan, without knowing what is the fault code, it is impossible to know what was happening with your Flex IO. This is an example on how to check the fault code with RSLogix 5000 is online during the problem is happening

have you check this : https://github.com/zgkxzx/Modbus4Android

your picture is blur and unreadable, but from the format looks it is come from Rockwell Automation software : RSlogix 5000 or Studio 5000 , basically you can convert each pair of TRANS and STEP at SFC to become one Rung or more in Ladder, Tags and logic expression from TRANS will be ladder...

Hi Mike, we can start from I/O List : DI : NA AI : 1 channel, Potensiometer input representing the position, you need to check what is the potensiometer specification, I saw this potensiometer made by ETI System but I can't see the model number or specification, you can check here the correct...

in this case, InEUMax will be 27420 and InEUMin will be 0, InRawMax and InRawmin, you need to know what is the value represent 4 mA and 20 mA, let say you want to send out 0 as 4 mA and 100 as 20 mA , then the configuration will be : InEUMax will be 27420 InEUMin will be 0 InRawMax will be...

you can use SCL instruction, but the scaling will be depend on your Analog Output module scale. InEUMax will be the same as your analog output min value at 20 mA and InEUMax will be the same as your analog output min value at 4 mA, InRawMax will be the same as the value that intended to be 20...