jagriti's latest activity

Hello ControlsGuy25... This is great. Thank you so much for this...will definitely help... After commissioning we will get detailed...

Jagriti, Would you pleaze give comments /feedback on my last post here. ControlsGuy25.

Hello ControlsGuy and James.. Thanks for the valuable inputs. Can you kindly share the manuals of the SICAM(CP-8080) if possible. Thanks...

Jagriti, In the SICAM (CP-8080) manual i got , there is information on some I/O cards/modules about scan rate of 10ms. That is what i...

Hello All Jagriti, 1-What the OEM manuals saying about faults/alarms recording scan rate /resolution ? In the manual that I got it is...

Hello everyone, Myself into operation & maintenance of a small power plant (60 MW with 3 nos frame-V Gas turbine with Mark-VIe control...

Hello everyone.. As per advice from Brush, we have powered off the AVR ( both 24VDC & PMG), but the screen issue did not go. Then we...

Hello ALL, Jagriti, I would add some notes on CSA "good questions/comments" I would ask you same questions! By the way after have...

Hello Jagriti, Thank you for these clarifications. The thing that I know is that there is sort of CAN bus transfer used on BRUSH...

All, I think this is a much more serious problem--potentially--than originally thought (well, than I originally thought). CAN bus is a...

Hello CSA ... Thank you so much for the information. We are contacting these issues again with Brush. Will update again further. thanks all

Hello CSA/Controls guy Thanks a lot for the info ...sorry for delay in response. please note :- 1. We have contacted Brush and they...

Hello, Jagriti, 1) What have you done to troubleshoot the problem--and, most importantly, what were the results? 2) Have you RTFM...

Hello everyone,, Myself into operation of a co-generation plant with three GE make frame 5 gas turbines with [email protected] with Mark-VIe...

Hello everyone, Myself working in a co-generation plant with 60 MW(3x20MW) generation with three gas turbines with HRSG boilers. I want...