Facebook
Google
GitHub
Linkedinmehdihn's latest activity
-
MBucket cooling is not controlled by the turbine control system.
-
MVJ/vijaycontrol, Tell us what have you learned from studying the P&IDs? Have you read the System Descriptions in the Operations &...
-
Mmehdihn reacted to CSA's post in the thread Learning About Speedtronic MARK V Control System with
Like.
eagle1, I hope you will take advantage of the wealth of posts here on control.com related to the GE Speedtronic Mark V turbine... -
MIsulamu, This topic has been covered before on control.com, but it has been several years. The purpose of the SRV (Stop-Ratio...
-
MMSF, First of all, the GCV should NEVER get 100% open under normal operating conditions (with proper gas fuel supply and P2 pressure...
-
MMSF, #1- The LVDT is used as an "outer loop" to the pressure loop. When the actual P2 pressure is equal to the P2 pressure reference...
-
MAnhishek Kumar,, Pretty simple to explain, actually. Presuming no one has "calibrated" the LVDTs on the two valves, the most likely...
-
MAbhishek Kumar, Well, plugging/choking does not ALWAYS immediately cause the supply pressure to decrease. It's not just about...
-
MBND, There is 'exhaust temperature control' and there is 'exhaust temperature control.' Which exhaust temperature control are you...
