vscontrol's latest activity

@WTF? , @ControlsGuy25 , Problem solved As per your advice, I made a clearness between the GCV valve stem and the GCV actuator rod...

Briefly, the procedure for "opening" the gap between the valve stem(s) and the actuator rod(s) is to push the LVDT bar down to push the...

I want to add that when the feeler gauges are removed from the gap between the valve stem and actuator rod it's common for the LVDTs to...

Thanks for the information. It's going to take me a while to go through the .csv file. From the alarm photos, I really don't like the...

Hi All After reading the alarm messages it seems that LVDT showing "Out of limits" and "Voltage unbalanced" do you know for with device...

latest alarm display

Mark v TMR Vibration sensitivity changed by Control TA, as he wants to use a 200mv vibration sensor in place of 150mv Not sure why they...

@vscontrol, So, you really want to do this dance? You haven't provided a single alarm--Process or Diagnostic. You didn't say whether...

Summary: The unit was shut down due to a Gas Valve Leak (GGV leak), and recently, we reinstalled our gas valve in the turbine and...