Recent content by Wolverinecse

Good show. let’s look at the pictures you posted. First the picture of the A server connection file called default.stn file. It is configured to look at ARKDESTNA Server and uses 10 as the flex station number. But look at the aux setup file name. It is also default.stn. It is the same...

Forgive if this covers items you have checked or know. you may want to check your connection files. On experion systems i have seen all flex stations connect to the primary server which is now the B server since the switchover to B was done. Often a default connection file exists that is...

You may want to consider what you or your operators are needing to with the information. the scan period showing on the digital status point is one second. the event is every .8 Sec. If the signal is only on for 0.1 second you will likely miss the event. If you have other scada running in your...

Has this controller been in service for before? you noted 'startup' in your notes. Normally when working with PID function blocks in Experion controllers initialization will be handled automatically in many cases IF the control blocks used can pass initialization from the secondary (water)...

In configuration studio, use the "administer the control strategy database" option. this will open DBAdmin tool. navigate drop downs to ERDB Active locks. review and clear locks that are shown. Hope this helps.