Search results

Search everything Search threads Search blogs
You may enter multiple names here.
  1. T

    Steam turbine hydraulic servo etd1 and etd 2 not energized

    sorry for a long delay about this issued. here is what I found the problem. the TCEA card has a short circuit causing the 5 volts fuse keep popping and its 4 Omron 24v relay doesn't switch. so one side has -67 volts and the other plus voltage is not. Hope is help some others out there. thanks
  2. T

    Steam turbine hydraulic servo etd1 and etd 2 not energized

    Thanks for your fast response. According to the ge steam turbine diagram and I am not 100% sure that on the positive side is power by the etd1 and etd2 that controlled by the tcea cards and ptr1 and ptr2 negative signal is on tcts card. the only upstream is power by the two cards and sent the...
  3. T

    Steam turbine hydraulic servo etd1 and etd 2 not energized

    Hi all My name is Tim vo We have a GE mark V steam turbine system that control the hydraulic of ETD1 and ETD 2 is trip due to the header pressure from the pressure switch ps282 is zero psi. This is the HPM-15 module for the lube oil skid. Testing the solenoid from external power is working fine...
  4. T

    mark V "I" work station does not see in stage link c-processor

    Hi All, While trying to build a backup "I" workstation, when testing communications, the "I" will not communicate to the Mark V's C-Processor. The workstation is a duplicate of the working "I" workstation. All settings and configurations are the same and match. Motherboard, ISA ArcNet card are...
Top