S
I am Facing Problem Getting Kwh Readings From My Satec MFM (PM130-PLUS), Required for an easy & reliable Monitoring On Energy Consumption.
Connected via RTU Slave Interface with SCADA User Interface (GE_Cimplicity).
Here's what happening:
Actual Kwh Reading has 8_decimal Point/digits on MFM Display but on SCADA User Interface Screen It only Displays 4_Decimals/digits,
eg, 15270156 kwh shows as 156
and 63290058 kwh shows as 58
and 15299999 kwh shows as 9999
and 15300001 kwh shows as 1 only!
Is It something to do With the Holding Registers or Extended Registers Functions??
Please Do a Reply, your slight approach to my Query Will be highly Appreciated
Connected via RTU Slave Interface with SCADA User Interface (GE_Cimplicity).
Here's what happening:
Actual Kwh Reading has 8_decimal Point/digits on MFM Display but on SCADA User Interface Screen It only Displays 4_Decimals/digits,
eg, 15270156 kwh shows as 156
and 63290058 kwh shows as 58
and 15299999 kwh shows as 9999
and 15300001 kwh shows as 1 only!
Is It something to do With the Holding Registers or Extended Registers Functions??
Please Do a Reply, your slight approach to my Query Will be highly Appreciated