Search results

Check the meter specification. There are min flow requirements, and examine a fluid sample as to its properties.

in the TPA/PTA design I worked on load cells were used in the actual design at the time

the transmitter elevation as suggested under the presumption that you would not experience solids buildup. Liquid services normally require filled lines with XMTR below the line

Should not be a problem with proper materials and transmitter mounted remotely above the pipe.

one is for measuring flow though in some cases restricting flow, the other for safety

Elbow meters are more than adequate.

Translation : I have the acm 3720 and the com32, how can I view the consumption history on a PC?

ISchuerch, Have dealt with multifuel boilers (6 different streams). This complicates the startup, safety interlocks and fuel / drum level controls, but excess oxygen control for common dampers/blowers was not a problem. Good luck!

lschuerch, The number of burners makes little difference in the excess O2 control, unless you are using insitu O2 monitoring for each burner.

varatha your pressure units are most likely "inches water column", as few flow meters are design to tolerate 50/150 psi pressure differentials.

You need to test your pressure devices.

As CSA suggests, any question regarding shutoff valves requires far more specifics, likely unsuited to public forums.

munny Your accuracy is as good as the installation details and the liquid data, and of course a calibrated transmitter

In the infantry training handbooks circa WWII and the 1950's, water purification in emergencies, away from all resources, suggested collecting the water, and letting it stand for a 4 hours in the sun, to let the solids settle out and the bacteria to digest all available content, then decant...

munny, Just test it yourself, and report back, we'd all be interested in what you find

What level of accurracy do you seek?

what distance are you dealing with.

With a bit of guess work regarding pipe size etc. The measurment error is small, the time constant listed is the exponential time constant with a settling time for 2% error being 4X the time constant. Most heat exchangers are characterized by heavy turbulence to improve heat transfer. With...

or you can run your own: thermowellsoftware com

If you have flow and nominal fluid data, I'll run a measurment error calc for the well mixed flow condition to indicate what you're dealing with.