1. B

    Mark 5 diagnostic alarms

    Our D11 Steam Turbine is experiencing diagnostic alarms on 2 valve regulator/LVDT 'position diffhigh.' I have calibrated the LVDT 0-100% and the voltages have a max spread between the highest and lowes of .035v. I can't find any info in the GEK.
  2. B

    Flow dynamic is affecting stillwell, and level reading, for hydrostatic level transmitter

    Cooling tower level probes have stillwell with 1/2 inch holes every 6 inches and 90 degrees apart, from top to bottom of the 18 foot pit. A strange dynamic has occurred causing the level in the stillwell to change by as much as a foot. It looks like the flow across one of these stillwells is...
  3. B

    Mark V solenoid fusing

    Several MarkV sites have encountered fires related to a shorted solenoid valve output (generally powered from QD1 DTBD terminal.) These outputs are not individually fused so a short at the solenoid can and has caused the terminal board to overheat and burst into flames. It is never good to let...
  4. B

    Rebuilt Mark5 HMI not working, TCI won't start, error 1331

    This is a 3 unit Mark5 with an HMI at each unit and a server HMI in control room. all running XP. I rebuilt the server HMI and am unable to get TCI, or the project, to start. I am testing our ability to restore an HMI. I am using an available Dell PC, as opposed to the HP brand supplied by GE...
  5. B

    Mark 5 HMI virtual drives

    I am trying to understand how the Mark 5 HMI running WinXP creates virtual drives(or drive letter links) without those drive letters being listed in Windows device manager. I need to understand how GE set these HMIs up. If I need to rebuild a box I need to know how the F: and G: drive are...
Top